hdpe waterproofing sheet
Hdpe waterproofing sheet is a superior product that boasts excellent corrosion resistance, electrical performance, moisture resistance, leak-proof capabilities, and high tensile strength. As a result, it is widely used in various fields, such as electrical wiring and cable, engineering anti-leakage, aquaculture anti-leakage, oil tank anti-leakage, basement anti-leakage, and artificial lake anti-leakage.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
Hdpe waterproofing sheet is a superior product that boasts excellent corrosion resistance, electrical performance, moisture resistance, leak-proof capabilities, and high tensile strength. As a result, it is widely used in various fields, such as electrical wiring and cable, engineering anti-leakage, aquaculture anti-leakage, oil tank anti-leakage, basement anti-leakage, and artificial lake anti-leakage.
Hdpe waterproofing sheet have excellent impact resistance, making them suitable for use in normal temperature and even at temperatures as low as -40F. They are white granules with a melting point of approximately 110℃-130℃ and a specific density of 0.918-0.965. They are non-toxic, odorless, and tasteless, with good heat resistance and cold resistance. They have good chemical stability, high rigidity, and toughness, excellent mechanical strength, and good resistance to environmental stress cracking and tear strength. As the density increases, the mechanical performance and barrier properties also correspondingly increase, making them more heat-resistant and have higher tensile strength. They are resistant to corrosion from acids, alkalis, organic solvents, and more.
Product Features
HDPE impermeable film has high tensile resistance, and its excellent elasticity and deformation ability make it very suitable for expansion or contraction of the base surface, which can effectively overcome the uneven settlement of the base surface.
Aging performance - impermeable film has excellent anti-aging, anti-ultraviolet, anti-decomposition ability, can be used naked, material service life of 50-70 years, providing a good material guarantee for environmental impermeable.
Low cost and high efficiency - HDPE impervious film using new technology to improve the impervious effect, but the production process is more scientific, fast, so the product cost is lower than the traditional waterproof material, the actual calculation of the use of HDPE impervious film to save about 50% of the cost of the general project
Specification
|
Length |
HDPE Thickness |
Membrane Thickness |
|
1m/2m |
0.8mm/1.0mm |
1.2mm/1.5mm |
Application Places
1. Seepage prevention of landfill, sewage or waste residue treatment sites.
2. River dikes, lake DAMS, tailings DAMS, sewage DAMS and reservoir areas, channels, liquid storage ponds (pits, mines).
3. Subway, basement and tunnel, tunnel anti-seepage lining.
4. Roadbed and other foundation salt seepage prevention.
5. Horizontal anti-seepage blanket in front of embankment and dam, vertical anti-seepage layer of foundation, construction cofferdam, waste yard.
6. Seawater and freshwater farms.
7. The foundation of roads, expressways and railways; Waterproof layer of expansive soil and collapsible loess.
8. Roof seepage prevention.
Technical Data
|
No. |
Test Item |
Test Method |
Result |
Conclusion |
|
|
1 |
Peel Strength |
ASTM D903-98(2017) |
0.201kgf/mm |
Pass |
|
|
2 |
Puncture Resistance |
ASTM E154/E154M-08a(2013) |
995N |
Pass |
|
|
3 |
Tear Strength |
ASTM D624-00(2012) |
Transverse |
77.1kN/m |
Pass |
|
Lengthways |
77.6kN/m |
||||
|
|
Tensile Strength |
|
Transverse |
24.5Mpa |
Pass |
|
Lengthways |
24.8Mpa |
||||
|
Elongation at break |
Transverse |
935% |
Pass |
||
|
Lengthways |
930% |
||||
|
5 |
Tensile Strength |
ASTM D412-16 |
Transverse |
25.6Mpa |
Pass |
|
Lengthways |
26.2Mpa |
||||
|
Elongation at break |
Transverse |
860% |
|||
|
Lengthways |
800% |
||||
|
6 |
T-Peel Strength |
With reference to ASTM D1876-08(2015) and client's requirement |
0.541 N/mm |
Pass |
|
|
7 |
Water Absorption |
ASTM D570-98(2010) |
0.29% |
Pass |
|
|
8 |
Low Temperature Flexibility |
ASTM D1790/D1790M-15 Section 7.6 |
No affection |
Pass |
|
Details
Impermeable film in the transportation process do not drag, hard pull, to avoid sharp objects stabbing.
1, should be extended from the bottom to the high, do not pull too tight, should leave a 1.50% margin for local subsidence and stretching. Considering the actual situation of the project, the slope is laid from top to bottom.
2, the longitudinal joints of the two adjacent pieces should not be on a horizontal line, should be staggered more than 1m;
3, the longitudinal joint should be more than 1.50m away from the dam foot and bend foot, and should be located on the plane;
4, the first slope behind the bottom;
5, when the slope is laid, the film direction should be basically parallel to the maximum slope line.
Project Pictures


Hot Tags: asian paints hdpe membrane, China asian paints hdpe membrane suppliers, factory, bituminous membrane sheet, Green Roof Membrane, transparent waterproof membrane, Reinforced PVC Membrane, hdpe waterproofing sheet, Root Penetration Resistance Roof Membrane










