Self Adhesive Foundation Membrane
Self adhesive foundation membrane, which is composed of polymer sheet, self-adhesive rubber asphalt glue and isolation film, and can be reinforced with chemical composite fabric on physical polymer sheet as required.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
Self adhesive foundation membrane consists of polymer sheet, self-adhesive rubber bitumen glue and isolation membrane, and its construction process is very simple and efficient. As an environmentally friendly product, it will not cause environmental pollution and fire hazards. Because it is non-toxic and tasteless, workers will not feel discomfort during construction. The material has self-healing function and good adhesive properties, so its coil and base life are synchronized and bonded firmly. It can be widely used in sunken road floors, exterior walls, underground tunnels and other places of industrial and civil buildings.
Product Features
1. The material has strong chemical resistance, so it can resist the alkali water of concrete and maintain excellent performance.
2. The product has the advantages of puncture resistance, low temperature resistance and UV resistance, which can ensure a long service life.
3. Since it is non-toxic and tasteless, the whole construction process will not cause physical harm to workers.
4. This easy-to-operate product only needs a short construction period to complete the construction.
5. We can reinforce the chemical composite fabric on the physical polymer sheet according to your needs.
Specification
Product Name | Type | Thickness | Roll size |
Self adhesive foundation membrane | Strong cross film, aluminum film, hdpe film | 1.2mm-2.0mm | 1m width |
Data Sheet
Product Name | Self adhesive foundation membrane | |||||
1 | Water Impermeability | - | 0.3MPa, 120min, Impervious | Pass | ||
2 | Permeability properties | piece | ≤ 2 | 1 | ||
3 | Elongation at Break | Longitudinal | N/50mm | ≥150 | 382 | |
Lateral | N/50mm | ≥150 | 365 | |||
Longitudinal Max | % | ≥30 | 650 | |||
Lateral Max | % | ≥30 | 715 | |||
4 | Tear Strength | Longitudinal | N | ≥12 | 53 | |
Lateral | N | ≥12 | 53 | |||
5 | Flexibility at Low Temperature | ℃ | -15℃, no cracks | Pass | ||
6 | Water Impermeability | - | 0.3MPa, 120min, Impervious | Pass | ||
7 | Heat resistance | - | 70℃, 2h, no flow | Pass | ||
8 | Peel strength (membrane to membrane) | N/mm | ≥1.0 | 2.10 | ||
9 | Peel strength (membrane to cement) | N/mm | ≥2.0 | 2.10 | ||
10 | Adhesion time | min | ≥15 | ≥60 | ||
11 | Heat Treatment (70℃, 168h) | Tensile Strength Retention | % | ≥90 | 95 | |
Elongation at Break | % | ≥80 | 96 | |||
Flexibility at Low Temperature | ℃ | -13℃, no cracks | Pass | |||
12 | thermostability | Longitudinal | % | ≤ 2.0 | 0.6 | |
Lateral | % | ≤ 2.0 | 0.4 | |||
Application Technology
Wet applied application technology:
1. Cleaing and waterproofing of the grassroots: Clean up the grassroots before removing them, moisten them with water, and leave no water residue.
2. The water-cement ratio of cement slurry at normal temperature is about 0.4. Workers can adjust it according to the temperature and humidity of the base or use some sand as mortar to roll on the base.
3. Remove the surface release paper (membrane), and spread the film on the cement mortar or plain cement slurry.
4. Exhaust and bonding.
5. Seam sealing.
Storage and Transportation
Store in dry and ventilated environment. Avoid sun and rain. During transportation and storage, products of different types and specifications should be stacked separately, and should not be mixed to prevent tilting or side pressing. Stacking height should not exceed 5 storeys. Storage temperature shall not be higher than 45℃.
 |  |
Why choose us?
- Our Adhesive Waterproof Membrane products have proven to be effective in withstanding severe weather conditions.
- Our company actively adapt to the market development trend with its strong development advantages, high starting point and high standard.
- Our Adhesive Waterproof Membrane products have been tested for quality and performance by independent laboratories.
- Our current Self Adhesive Foundation Membrane lays a good foundation, on which we will provide more new series in the future.
- Our Adhesive Waterproof Membrane products are available at competitive prices without compromising quality.
- We insist on working side by side with customers to help them solve problems and create value for them.
- We have a reputation for delivering Adhesive Waterproof Membrane products on time and on budget.
- In the fierce competition, our company does not lack talent advantage, nor does it lack technical advantage.
- Our Adhesive Waterproof Membrane products are perfect for sealing roofs, basements, and other areas prone to leaks.
- The company has formed a very competitive advantage from the independent development and production of products, to the scale, marketing network construction.
Hot Tags: self adhesive foundation membrane, China self adhesive foundation membrane suppliers, factory, waterproofing membrane for wood decks, SBS Membrane, waterproof membrane, APP Fiberglass reinforced bitumen Membranes, waterproof membrane over tiles, waterproofing membrane for pools
