Adhesive for Waterproof Membrane
Adhesive for waterproof membrane, A kind of polymer asphalt adhesive waterproof membrane, High polymer resin and high standard asphalt as the raw material, With polyethylene film or aluminum film as the surface material or without film(double-side adhesive), using anti-stick isolation layer.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
Adhesive for waterproof membrane, A kind of polymer asphalt adhesive waterproof membrane, High polymer resin and high standard asphalt as the raw material, With polyethylene film or aluminum film as the surface material or without film(double-side adhesive), using anti-stick isolation layer.
Product Features
1. Forming high strength waterproof layer, strong resistance to pressure water.
2. Cold construction: do not use open fire, no pollution to the environment, belongs to environmental protection products.
3. There is no need for maintenance in the later stage, so there is no need for any maintenance costs.
4. Good bonding performance, and has self-healing function, the membrane is fully bonded with the base, the joint itself and the membrane life, more convenient, and the time limit is also very short.
Where to use
1, used for non-exposed roof and underground engineering waterproof layer;
2, clear excavation method of subway, tunnel, pool, reservoir, canal and other engineering waterproof;
3, waterproof project which is not allows to use open fire;
4, Low temperature flexibility is better, suitable for cold areas.
Specification
Product Name | Type | Thickness | Roll size |
Adhesive for waterproof membrane | Strong cross film, aluminum film, HDPE film | 1.2mm-2.0mm | 1m width 20-30m length or customer made |
Technical Data Sheet
No. | Item | Unit | Standard | Result | ||
1 | Water Impermeability | - | 0.3MPa, 120min, Impervious | Pass | ||
2 | Elongation at Break | Longitudinal | N/50mm | ≥150 | 381 | |
Lateral | N/50mm | ≥150 | 369 | |||
Longitudinal Max | % | ≥30 | 651 | |||
Lateral Max | % | ≥30 | 717 | |||
3 | Tear Strength | Longitudinal | N | ≥12 | 56 | |
Lateral | N | ≥12 | 54 | |||
4 | Flexibility at Low Temperature | ℃ | -15℃, no cracks | Pass | ||
5 | Water Impermeability | - | 0.3MPa, 120min, Impervious | Pass | ||
6 | Heat resistance | - | 70℃, 2h, no flow | Pass | ||
7 | Peel strength (membrane to membrane) | N/mm | ≥1.0 | 2.2 | ||
8 | Peel strength (membrane to cement) | N/mm | ≥2.0 | 2.2 | ||
9 | Adhesion time | min | ≥15 | ≥60 | ||
10 | Heat Treatment | Tensile Strength Retention | % | ≥90 | 97 | |
Elongation at Break | % | ≥80 | 98 | |||
Flexibility at Low Temperature | ℃ | -13℃, no cracks | Pass | |||
11 | thermostability | Longitudinal | % | ≤ 2.0 | 0.6 | |
Lateral | % | ≤ 2.0 | 0.4 | |||
Application Technology
Base level and sanitation treatment → Apply cement mortar to the base surface. → Tear off the insulation film of the waterproof material → Lay the self-adhesive waterproof material on the construction surface. → Leave for 2 days and seal the interface firmly.
Caution:
1. pay attention to is the cleanliness of the surface of the wet paving self-adhesive waterproof rolling material, and at the same time, we should keep it flat before construction.
2. When applying cement, we should pay attention to its thickness. Under normal circumstances, its thickness is about 20 mm, and the specific situation depends on the level off of the base.
3. When sealing the interface, we must pay attention to the sealing and the joint problem, the joint must be strict.
Storage and Transportation
1. When transported, it must be placed vertically, no more than two layers high, to prevent tilting or horizontal pressure, and covered with tarpaulin.
2. Under normal storage and transportation conditions, the storage period shall be one year
3. Avoid sun and rain and store in dry and ventilated environment.
 |  |  |
Why choose us?
- Our factory has a state-of-the-art production line for Adhesive Waterproof Membrane products.
- We always adhere to the environmental protection concept of ecological priority and green development, and vigorously promote the application of clean production technology.
- We have a proven track record of providing quality Adhesive Waterproof Membrane products to customers worldwide.
- Our company adheres to the exploration and innovation, vigorously carries out innovative technology, and constantly researches and develops new products to meet the growing needs of the market and customers.
- We are a trusted partner of many businesses and individuals for their Adhesive Waterproof Membrane needs.
- We actively understand the development of technology at home and abroad, broaden our horizons, and ensure technological innovation and sustainable development.
- Whether you're a contractor, builder or homeowner, we have the right Adhesive Waterproof Membrane products for you.
- Our company is an efficient and intelligent technology-based enterprise. We specialize in the manufacture of Adhesive for Waterproof Membrane and other products. We have senior technical personnel and a modern management team with strong scientific and technological innovation ability and rich technical experience, as well as strong product research and development, design, manufacturing, sales, and service capabilities, so our products have won a good reputation.
- We offer a range of Adhesive Waterproof Membrane products to suit the diverse needs of our customers.
- Our testing system is advanced, and we have won the favor of our customers with our quick market response, flexible modern production and operation, and excellent and thoughtful after-sales service.
Hot Tags: adhesive for waterproof membrane, China adhesive for waterproof membrane suppliers, factory, bathroom tile membrane, APP Fiberglass reinforced bitumen Membranes, waterproof membrane over plywood, 3mm self adhesive bitumen waterproofing membrane, waterproof membrane outdoor, orange waterproofing membrane for showers
