Penetron Crystalline Waterproofing Coating
Penetron Crystalline Waterproofing Coating is perfect for applications in all kinds of buildings and structures. Whether you need to waterproof a basement, a roof, a bridge or any other structure that is exposed to water and moisture, this coating has got you covered.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
penetron crystalline waterproofing coating
Penetron Crystalline Waterproofing Coating, the breakthrough solution to all your waterproofing needs, is now available. This cutting-edge coating is manufactured with an active material with a molecular structure that is both hydrophilic and hydrophobic. It can dissolve in water yet does not shrink or break when dried due to its unique features. Instead, it forms a water-insoluble crystal that forms an impenetrable barrier to water and moisture.
Penetron Crystalline Waterproofing Coating is ideal for use in a wide range of buildings and structures. This coating can be used to waterproof a basement, a roof, a bridge, or any other structure that is exposed to water and moisture.
Penetron Crystalline Waterproofing Coating is the go-to choice for architects, engineers, and builders worldwide because to its excellent performance and dependability. Its distinct features make it the most effective and long-lasting solution for waterproofing any property, protecting it from water and moisture damage for years to come.
So, if you're looking for a high-quality waterproofing solution that will give you piece of mind, Penetron Crystalline Waterproofing Coating is the way to go. It is available in a variety of sizes and quantities, making it the ideal answer for any project, large or little. Order yours today and enjoy the best in waterproofing technology!
Technical Data
|
No. |
Item |
Unit |
Standard |
Result |
Result |
|
|
2 |
Water content |
% |
≤1.5 |
0.5 |
Pass |
|
|
3 |
Fineness, 0.63mm |
% |
≤5 |
0.27 |
Pass |
|
|
4 |
Chloridion content |
% |
≤0.10 |
0.023 |
Pass |
|
|
5 |
Breaking strength(28d) |
Mpa |
≥2.8 |
7.1 |
Pass |
|
|
6 |
Compressive Strength(28d) |
MPa |
≥15.0 |
24.5 |
Pass |
|
|
7 |
Bonding strength with wet substrate (28d) |
MPa |
≥1.0 |
1.8 |
Pass |
|
|
8 |
Mortar anti-permeability |
With mortar coating anti-permeability(28d) |
MPa |
Actual test value |
0.8 |
Pass |
|
anti-permeability pressure ratio(With mortar coating)(28d) |
% |
≥250 |
267 |
Pass |
||
|
Without mortar coating anti-permeability(28d) |
MPa |
Actual test value |
0.6 |
Pass |
||
|
anti-permeability pressure ratio(Without mortar coating)(28d) |
% |
≥175 |
200 |
Pass |
||
|
9 |
Concrete anti-permeability |
With Concrete coating anti-permeability(28d) |
MPa |
Actual test value |
1.1 |
Pass |
|
anti-permeability pressure ratio(With Concrete coating)(28d) |
% |
≥250 |
275 |
Pass |
||
|
Without Concrete coating anti-permeability(28d) |
MPa |
Actual test value |
0.7 |
Pass |
||
|
anti-permeability pressure ratio(Without Concrete coating)(28d) |
% |
≥175 |
175 |
Pass |
||
|
With Concrete coating anti-permeability(56d) at 2nd time |
MPa |
≥0.8 |
0.8 |
Pass |
||
Recommended usage
1.5kg/m2 to reach 1mm thickness
Water: Cement=(0.22~0.27): 1
- Good permeability, high water resistance; typical waterproof paint can only permeate the top, however our cement base can enter deeply and quickly crystallize.
- After coating, the cement base penetrates the crystal to seal the base surface and prevent water leakage. Say goodbye to the anti-alkali peeling issue.
- It can be built on the face and back of the water, as well as on the foundation of the supermarket.
- Good water sealing effect, with the capacity to automatically repair cracks and faults.
- The penetration depth can exceed 50mm, and the penetration capacity is good.
- The cement base can infiltrate the pores of the concrete structure and act as a water barrier.
Convenient building
Effective waterproofing
Defect in dynamic repair
Excellent ecological performance
Point to consider
- Keep away from high temperatures, fire sources, and other flammable and explosive goods in a well-lit, ventilated, moisture-proof environment.
- It is advisable to first set the waterproof coating on a sturdy surface and clean away foreign objects such as debris and cement particles in it to avoid affecting the waterproof coating's quality.
- Avoid prolonged sun exposure; else, bodily changes may develop.
Why Choose Us?
- The corporate concept and service principle of "integrity, focus, innovation, and development" shall be maintained by our organization.
- We are a dependable supplier of HDPE Waterproof Membrane goods, collaborating with clients to provide the best solutions for their specific requirements.
- Because we have first-rate technology, brand-new crafts, and cutting-edge equipment, our HDPE Membrane for Waterproofing has a high market competitiveness.
- We try to acquire customers by providing high-quality products, to keep them by providing excellent service, and to ensure that they utilize our products with confidence.
Hot Tags: penetron crystalline waterproofing coating, China penetron crystalline waterproofing coating suppliers, factory, polymer modified cement waterproofing, asphalt roof coating, Polymer Modified Cementious Waterproofing Coating, water proofing cement paint for roof, waterproofing polymer coating, steel Polymer Modified Cement Waterproofing Coating
