Cementitious Water Proofing

      JS Waterproof Coating is a cementitious waterproofing coating made out of a synthetic polymer emulsion and a variety of additives blended with powder components. It is a waterproof coating that is flexible and produces a waterproof barrier. The letters JS stand for Polymer and Cement, indicating that it is a two-component waterproofing coating.

      Roofs, balconies, basement walls, baths, and swimming pools are just a few of the applications for this coating. It can be used on a range of surfaces such as concrete, brick, stone, and metal. JS Waterproof Coating's unique formulation provides long-lasting protection against water, weathering, and other environmental influences.

      The elasticity of JS Waterproof Coating allows it to accept structural motions without cracking, which is one of its key advantages. It also has good adherence to various substrates and a quick setting time, allowing for faster project completion. The coating is simple to apply using a brush, roller, or spray, and it comes in a variety of colors.

      JS Waterproof Coating outperforms standard waterproofing technologies such as bitumen or sheet membranes in many ways. It is safe for the environment because it contains no toxic solvents or chemicals. The coating is also long-lasting, low-maintenance, and inexpensive.

      Finally, JS Waterproof Coating is a high-performance waterproofing solution that provides outstanding protection to a wide range of substrates. Its unique formulation and flexibility make it an excellent choice for a wide range of waterproofing applications. JS Waterproof Coating is the appropriate answer for your needs whether you want to waterproof your home or commercial property.

• Js-I waterproof coating is mostly utilized on big deformed sections such as the roof and basement.
• Js-II waterproof coating is mostly used for external walls, toilets, and bath rooms, as well as other components with little deformation.
• Js-III waterproof coating is typically utilized in basements, kitchens and bathrooms, outside walls, and other waterproof areas.

advantages:

 

• High polymer content, strong elasticity, may be built immediately on the surface of slow-setting soil, firm bonding, simple operation and construction. The base's moisture content is not limited, but the base's surface cannot have open water.

 

• Because the polymer content is low, the fracture elongation will be lower than that of type JS-I. However, its rigidity is greater, its bonding strength is high, the coating layer is highly puncture resistant, and it dries quickly. Use in conjunction with a long-term immersion environment or a little quantity of wet activity.

 

 

 

 

 

Advantages:

• As the waterproofing effect of the rear surface improves, such as the bonding substance of the decorative tile, the problem of wall leakage caused by the falling off of the exterior wall decorative tile may be successfully solved.

 

Tips:

• Shelf life

The temperature from 5ºC to 40ºC, valid time is one and half a year.

• Packaging

Liquid: 20kg/bucket，Powder: 20kg/bag

• Matters needing attention

The prepared material should be used up within two hours, otherwise the viscosity will affect the construction. If you need to add water, do so now and stir with the blender as you slowly add powder. Stir for five minutes and then evenly until the material is free of aggregates.

Hot Tags: cementitious water proofing, China cementitious water proofing suppliers, factory, interior waterproofing membrane, waterproof paint top coat, liquid roof membrane, black Polymer Modified Cement Waterproofing Coating, balcony waterproofing paint, watertight paint for basements