Pre-applied HDPE Self-adhesive Fully Bonded Waterproof Membrane
HDPE membrane for waterproofing (with sand) contains multi-layer waterproofing materials of fine waterproofing performance. HDPE sheet, pressure sensitive adhesive layer and release liner are involved in the material.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Pre-applied HDPE self-adhesive fully bonded waterproof membrane is an innovative waterproofing solution for various types of construction projects. This product has been specifically designed to provide superior protection against water infiltration, ensuring that your building remains dry and free from structural damage.
What makes this product different from other waterproofing solutions is its pre-applied self-adhesive backing, which provides a quick and easy installation process. The HDPE membrane is made from high-density polyethylene, which gives it exceptional strength and durability, as well as resistance to punctures, tears, and chemicals. Additionally, the fully bonded design ensures that the membrane stays firmly in place, providing a lasting waterproofing solution.
The product comes in a variety of sizes to meet the needs of different projects. The standard sizes range from 1.2m x 20m to 2.0m x 30m, while customized sizes can also be produced based on your specific requirements.
The installation process for this product is straightforward and can be handled by an experienced contractor. Firstly, the substrate surface should be clean, dry, and free from any grease or other contaminants. The membrane is unrolled and applied directly onto the substrate surface, with the self-adhesive backing ensuring a strong bond. It is essential to overlap adjacent pieces of the membrane securely, providing a continuous waterproof barrier. Once completed, the waterproofing membrane can be covered with a layer of soil, asphalt, or other materials to protect against UV light and mechanical damage.
The product can be applied to many different types of applications such as foundations, roofs, balconies, and terraces. It is an excellent solution for both new construction and renovation projects, providing superior protection against water damage.
In conclusion, the pre-applied HDPE self-adhesive fully bonded waterproof membrane is an innovative and effective solution for waterproofing your construction projects. It has various advantages, such as easy installation, superior durability, and resistance to punctures and tears. With a variety of sizes available, it is suitable for various types of construction projects. The product provides a lasting solution that ensures your building remains dry and protected against water damage.
Specification
|
Length |
HDPE Thickness |
Membrane Thickness |
|
1m/2m |
0.8mm/1.0mm |
1.2mm/1.5mm |
Application Places
1. Basement, tunnel, underground, waterproofing below ground concrete structures.
2. Protection of concrete foundations against aggressive ground contaminants.
3. Prevent methane leakage in underground layers.
Technical Data
|
No. |
Test Item |
Test Method |
Result |
Conclusion |
|
|
1 |
Peel Strength |
ASTM D903-98(2017) |
0.201kgf/mm |
Pass |
|
|
2 |
Puncture Resistance |
ASTM E154/E154M-08a(2013) |
995N |
Pass |
|
|
3 |
Tear Strength |
ASTM D624-00(2012) |
Transverse |
77.1kN/m |
Pass |
|
Lengthways |
77.6kN/m |
||||
|
|
Tensile Strength |
|
Transverse |
24.5Mpa |
Pass |
|
Lengthways |
24.8Mpa |
||||
|
Elongation at break |
Transverse |
935% |
Pass |
||
|
Lengthways |
930% |
||||
|
5 |
Tensile Strength |
ASTM D412-16 |
Transverse |
25.6Mpa |
Pass |
|
Lengthways |
26.2Mpa |
||||
|
Elongation at break |
Transverse |
860% |
|||
|
Lengthways |
800% |
||||
|
6 |
T-Peel Strength |
With reference to ASTM D1876-08(2015) and client's requirement |
0.541 N/mm |
Pass |
|
|
7 |
Water Absorption |
ASTM D570-98(2010) |
0.29% |
Pass |
|
|
8 |
Low Temperature Flexibility |
ASTM D1790/D1790M-15 Section 7.6 |
No affection |
Pass |
|
Project Pictures
FAQ
1. Are you trading company or factory?
Yes, we have our own factory.
2. What are the functions of the sand?
One is UV resistant. The other is convenient for workers standing on top for application.
3. Can the product be customized?
Yes, We can do customized. Also provide OEM service.
Hot Tags: pre-applied hdpe self-adhesive fully bonded waterproof membrane, China pre-applied hdpe self-adhesive fully bonded waterproof membrane suppliers, factory, black waterproofing membrane, hdpe waterproofing sheet, membrane hdpe, waterproof membrane for internal walls, hdpe waterproof membrane, White TPO Waterproofing Membrane
